Introduction
The programme “Control and Monitoring Systems in Oil Facilities (SCADA)” develops professional practice in Oil and Gas. It connects the subject with workplace challenges by examining existing evidence and practices and choosing methods appropriate to the organization and its available resources.
The learning progresses from electrical systems, control, and operational efficiency to maintenance planning, work orders, and execution measurement, with practical work on engineering design, modeling, and simulation, the oil and gas value chain and operations, process safety, barriers, and management of change. Participants prepare outputs to support workplace application and review the quality and results of implementation.
Learning objectives
- Read a training electrical system and identify inspection, protection, and control requirements in an application related to “Control and Monitoring Systems in Oil Facilities (SCADA)”.
- Build an engineering model and assess its assumptions, limitations, and verification results.
- Analyze an oil and gas value chain process and connect performance to reliability and safety.
- Analyze an operational hazard scenario and review barriers and change control responsibilities.
- Build a maintenance plan and work order connecting asset criticality, resources, and documentation.
Learning areas
1. Electrical Systems, Control, and Operational Efficiency
- Read a training single-line or control diagram, identifying supply, loads, protection and measurement devices, and system boundaries.
- Analyze load, power quality, and efficiency requirements and fault indicators, checking data accuracy and conformity with equipment specifications.
- Identify the roles of protection, earthing, isolation, coordination, and control, referring settings and execution to specialists and approved technical references.
- Design an inspection and testing checklist covering criteria, tools, responsibilities, safety procedures, and permits without instructions for intervention on an energized circuit.
- Prepare a technical report comparing readings with approved limits and presenting possible causes, proposed actions, and approval requirements before execution. The application examines a case related to “Control and Monitoring Systems in Oil Facilities (SCADA)”.
2. Engineering Design, Modeling, and Simulation
- Translate needs into requirements, design limits, and load or operating cases, documenting criteria and references relevant to the case.
- Prepare an engineering model showing dimensions, materials, relationships, and constraints, and review consistency between drawings, assumptions, and inputs.
- Select a simulation method suited to the problem, define boundary conditions, and examine the sensitivity of results to input quality and model settings.
- Compare outputs with a reference calculation or available test data, distinguishing calculation accuracy from the validity of the model's representation of reality.
- Prepare a design report explaining results, limitations, risks, and required modifications, specifying matters requiring specialist engineering review and approval.
3. The Oil and Gas Value Chain and Operations
- Understand the links between exploration, development, production, processing, and transportation, and define process boundaries, participants, and intended outputs.
- Read a training process diagram, identifying material and energy flows, measurement points, critical equipment, and their relationship to product quality.
- Analyze production, downtime, losses, and resource consumption data, distinguishing measurement problems from process or equipment problems.
- Define coordination requirements among operations, maintenance, safety, and contractors, and document handovers and changes under facility procedures.
- Prepare a process improvement proposal covering hypotheses, controls, resources, and review criteria, using a training case without unauthorized field operations.
4. Process Safety, Barriers, and Management of Change
- Identify sources of hazardous materials and energy and process boundaries, distinguishing process safety from individual occupational safety in the case presented.
- Analyze the sequence, causes, and consequences of a hazardous event, and identify preventive and mitigating barriers and evidence for verifying their readiness.
- Review work permits, isolation, and coordination among parties under facility procedures, and identify hold points requiring specialist approval.
- Prepare a change request identifying its rationale, risks, and effects on documents, training, and emergencies, with technical review before implementation.
- Conduct a tabletop exercise involving a hypothetical barrier failure or leak, and document escalation and response actions, lessons, and the subsequent verification plan.
5. Maintenance Planning, Work Orders, and Execution Measurement
- Inventory assets and build a hierarchy, coding system, technical data, and maintenance history, classifying criticality by safety, service, and cost.
- Select a mix of preventive, condition-based, and corrective maintenance, connecting the decision to failure modes, data, and manufacturer instructions.
- Plan the work order's scope, resources, materials, time, isolation, and permits, and define readiness conditions before scheduling.
- Organize schedules, shutdowns, and equipment handovers between operations and maintenance, recording actual work, causes, parts, and time.
- Analyze backlog, recurrence, plan compliance, and reliability, and propose documented adjustments to maintenance tasks and their frequency.
Practical outputs
- A functional diagram, checklist, and preliminary analysis of electrical system performance.
- Design specifications, a simulation model, and a verification and review report.
- An oil operations process map, requirements matrix, and operating indicators.
- A register of risk scenarios and barriers, and an operational change review plan.
- A maintenance plan, work schedule, work order card, and monitoring indicators.
Who should attend
- Engineers, technicians, supervisors and operations staff whose work relates to the programme subject.
- Managers and teams working in oil and gas, according to their practical responsibilities.
- Professionals responsible for applying the outputs of “Control and Monitoring Systems in Oil Facilities (SCADA)” within their organizations.
Prerequisites
- Working familiarity with the programme field and the ability to discuss a professional case or challenge.
- Confirm the suitability of your experience and any specialist prerequisites with the Union before participation.
Conclusion
The programme “Control and Monitoring Systems in Oil Facilities (SCADA)” brings together concepts, case review and a practical application. Participants prepare steps that can be adapted to their responsibilities and organizational resources, with an indicator to follow application and review results after returning to work.
Participation arrangements and any special requests are specified in the confirmation issued by the Union.